Kramer Electronics VP-725NA - Manual (Page 40)

VP-725NA - Configuring and Controlling the VP-725NA 35
7.1.2 The PIP Screen
Figure 17 defines the PIP screen.
Figure 17: PIP Screen
PIP Screen
Setting Function Default
On/Off Activate/deactivate the PIP feature: On/Off
When PIP is activated and that input is not connected, the PIP window
appears black. If the zoom function is ON, the OSD prompts “cancel
zoom?"
Off
Type Select the PIP type: Picture-In-Picture, Picture + Picture or Split
Maintains the aspect ratio
Picture-In-
Picture
PIP Source Select the PIP source: See the table in Section 6.2
When changing the PIP source, the display fades through black
PIP Size Select the PIP size: 1/25, 1/16, 1/9, 1/4, or Custom 1/4
H-Position Set the horizontal position of the PIP on the display: 0 to 128 3
V-Position Set the vertical position of the PIP on the display: 0 to 128 0
H-Size Set custom size: 1 to 255
The actual range depends upon the input resolution
14
V-Size Set custom size: 1 to 255
The actual range depends upon the input resolution
5
Frame Turn the PIP frame on or off: On/Off On
Frame Color Select the color of the PIP frame: Red, Green or Blue Blue