Kramer Electronics VP-725NA - Manual (Page 37)

32 VP-725NA - Configuring and Controlling the VP-725NA
7.1.3 The Output Screen
Figure 16 defines the Output screen.
Figure 16: Output Screen
Output Screen
Setting Function Selection/Range Default
Resolution
Any change in the
resolution must be
confirmed via the
count-down
message that
appears on the
screen
Set the resolution:
Native HDMI, 640x480x60Hz, 640x480x75Hz,
800x600x50Hz, 800x600x60Hz, 800x600x75Hz,
1024x768x50Hz, 1024x768x60Hz, 1024x768x75Hz,
1280x768x50Hz, 1280x768x60Hz, 1280x720x60Hz,
1280x800x60Hz, 1280x1024x50Hz, 1280x1024x60Hz,
1280x1024x75Hz, 1366x768x50Hz, 1366x768x60Hz,
1400x1050x50Hz, 1400x1050x60Hz, 1600x1200x50Hz,
1600x1200x60Hz, 1680x1050x60Hz, 1920x1080x60Hz,
1920x1200x60Hz, 480px60Hz, 576px60Hz, 720px50Hz,
720px60Hz, 1080ix50Hz, 1080ix60Hz, 1080px50Hz,
1080px60Hz, 1080p@24Hz, [email protected],
[email protected], [email protected], [email protected]
[email protected], [email protected], or one of 4
Custom resolutions
If the Native HDMI is 1920x1080x60, the preferred mode
is defined as 1920x1080x60 (CEA-861).
The embedded audio feature is not available for the
RGB
resolutions 1920x1200 and 1920x1080. (It is available for
1080p)
If the custom resolution is set to be the same as the
default resolution, the scaler refers to the default
resolution
If Native HDMI is
not available, the
default is
1024x768@60Hz
HDMI Type Set the HDMI type: Auto, HDMI, DVI auto