Configuring your xpress, Demo mode, Rc i – SIRIUS XDRC2UG User Manual

Page 107

Advertising
background image

107

Configuring your Xpress

RC

i

Demo Mode

Your

Xpress

RC

i

has a demo mode that starts playing when the radio is not

yet activated and it’s either not receiving a signal or not connected to
the antenna . The demo mode disappears when the antenna is connected
properly or when the radio starts receiving a signal . After activation, the
demo does not appear under the above conditions .

If desired, you can put the

Xpress

RC

i

in demo mode after you have activated

the radio .

To enable or disable Demo Mode:

1 Make sure your Xpress

RC

i

is not receiving a signal . Either cover the

antenna so it cannot receive a signal or disconnect the antenna .

2 Press menu .

3 Scroll to highlight Factory Settings and press the Select button .

4 Press the Select button to select Demo Mode . Demo Mode will

turn yellow .

5 Turn the Control knob to select:

• Turn clockwise to On to play the demo .
• Turn counter-clockwise to Off when you’re ready to turn the

demo off .

6 Press the Select button .

Advertising