SIRIUS XDRC2UG - Manual (Page 37)

37
airbag locations on back pillars and above the doors . Airbag
locations are marked with “SRS” logos . Be careful not to crimp
or cut the cable .
4 . Bring the cable out from the trim near the front of the cabin
and route it under the carpet toward the dashboard or console .
Coil any excess cable in a hidden location, such as under the
carpet, keeping it away from any vehicle pedals or controls .
Secure the excess cable with wire ties (purchased separately) .
5 . Bring the end of the cable out at the PowerConnect Vehicle
Dock location . Leave yourself enough cable so you can easily
connect it to the antenna connector of the dock .
6 . Continue with “Step 5: Connect the Magnetic Mount Antenna
and PowerConnect Power Adapter” on page 39 .
• Pickup Truck:
1 . Use a blunt plastic putty knife
or similar blunt tool to lift
the rubber molding around
the windshield and tuck the
antenna cable underneath it .
2 . Continue tucking the cable
underneath the windshield
molding around the windshield
to the lowest corner .
3 . At the lowest corner of the
windshield, route the cable out