SIRIUS XDRC2UG - Manual (Page 42)

42
6 Be sure the vehicle is outside
and the antenna has a clear view
of the sky . Verify that you are
receiving the XM signal . There
should at least be one bar on
the upper right corner of the
main display screen that denotes
antenna signal strength . You can
also press menu and scroll down
to highlight Signal Indicator and
press the Select button . The Satellite and Terrestrial bars show the
strength of the signal being received . If the signal reception is good,
press menu twice to return to the main display screen .
7 Ensure that the FM Transmitter is turned Off . Xpress RC i is shipped with
FM Transmitter turned Off as the default . However, you can refer to
“Turn FM Transmitter On/Off” on page 92, if you want to verify that the
FM Transmitter is set to Off .
8 Ensure that Xpress RC i is tuned to channel 1 . Upon power up, Xpress RC i
should tune to channel 1 by default, when it’s not yet activated . If it’s
not on channel 1, refer to “Listening to Satellite Radio” on page 61 to
learn about how to tune a channel .
9 Turn on your vehicle’s stereo system . Set it to play input from the
auxiliary input source .
10 You should hear XM channel 1 through your vehicle’s stereo system . You
are now ready to activate your Xpress RC i .
Vehicle Installation