SIRIUS XDRC2UG - Manual (Page 45)

45
the XM signal . There should
at least be one bar on the
upper right corner of the
main display screen that
denotes antenna signal
strength . You can also press
menu and scroll down to
highlight Signal Indicator
and press the Select button .
The Satellite and Terrestrial
bars show the strength of the signal being received . If the signal
reception is good, press menu twice to return to the main display
screen .
7 Ensure that the FM Transmitter is turned Off . Xpress RC i is shipped
with FM Transmitter turned Off as the default . However, you can
refer to “Turn FM Transmitter On/Off” on page 92, if you want to
verify that the FM Transmitter is set to Off .
8 Ensure that Xpress RC i is tuned to channel 1 . Upon power up,
Xpress RC i should tune to channel 1 by default, when it’s not yet
activated . If it’s not on channel 1, refer to “Listening to Satellite
Radio” on page 61 to learn about how to tune a channel .
9 If you haven’t done so, turn on your vehicle’s stereo system . Set it
to play input from the cassette source .
10 You should hear XM channel 1 through your vehicle’s stereo
system . You are now ready to activate your Xpress RC i .