Option 3: power connect installation instructions, Into the dock . 3 by default, your xpress, By pressing the power button – SIRIUS XDRC2UG User Manual
Page 47
47
Option 3: PowerConnect Installation Instructions
1 Insert the dock into the
mount .
2 Insert your Xpress
RC
i
into the dock .
3 By default, your
Xpress
RC
i
turns on
automatically when
it is plugged in and
receiving power . If it does not, power on your
Xpress
RC
i
by pressing the Power button .
NOTE! You may experience a brief delay while your
Xpress
RC
i
powers up . If you press the Power button
during this time, you will see a “Please Wait” message .
4 Be sure the vehicle is outside and the antenna
has a clear view of the sky . Verify that you are
receiving the XM signal .
There should at least be
one bar on the upper right
corner of the main display
screen that denotes antenna
signal strength . You can also
press menu and scroll down
to highlight Signal Indicator
and press the Select button .