RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Labelling scales, Wpw/e, Wpw/e/h
Advertising
Manual number
ITKU-11-03-11-11-A
Labelling scales:
•
WPW/E
•
WPW/E/H
M A N U F A C T U R E R O F E L E C T R O N I C
W E I G H I N G I N S T R U M E N T S
RADWAG 26 – 600 Bracka 28 Street - POLAND
Radom,tel.+48483848 800, tel/fax +4848 385 00 10,
sales department +4848 366 80 06
www.radwag.com
Advertising
This manual is related to the following products:
WPW 60/H4/K Multifunctional Scales, WPW 60/H3/K Multifunctional Scales, WPW 60/C2/K Multifunctional Scales, WPW 6/H2/K Multifunctional Scales, WPW 6/F1/K Multifunctional Scales, WPW 300/H6/K Multifunctional Scales, WPW 300/H5/K Multifunctional Scales, WPW 300/C3/K Multifunctional Scales, WPW 300/C2/K Multifunctional Scales, WPW 30/H3/K Multifunctional Scales, WPW 30/F1/K Multifunctional Scales, WPW 30/C2/K Multifunctional Scales, WPW 3/H1/K Multifunctional Scales, WPW 150/H6/K Multifunctional Scales, WPW 150/H5/K Multifunctional Scales, WPW 150/H4/K Multifunctional Scales, WPW 150/H3/K Multifunctional Scales, WPW 150/C3/K Multifunctional Scales, WPW 150/C2/K Multifunctional Scales, WPW 15/H3/K Multifunctional Scales, WPW 15/H2/K Multifunctional Scales, WPW 15/F1/K Multifunctional Scales
Table of contents
Document Outline
- 1. INTENDED USE
- 2. PRECAUTIONARY MEASURES
- 3. WARRANTY CONDITIONS
- 4. MAIN DIMENSIONS
- 5. DESCRIPTON OF CONNECTORS
- 6. UNPACKING AND MOUNTING
- 7. GETTING STARTED
- 8. KEYBOARD
- 9. PICTOGRAMS
- 10. FUCTIONS OF KEYS
- 11. MENU - PARAMETERS
- 12. WEIGHING
- 13. MAIN PARAMETERS
- 14. PORTS PARAMETERS
- 15. EXTERNAL DEVICES
- 15.1. Cooperation with a computer
- 15.2. Cooperation with printers
- 15.3. Cooperation with a barcode scanner
- 15.4. Cooperation with a transponder card reader
- 15.5. Cooperation with an additional display
- 16. DATE / TIME SETTING
- 17. PRINTOUTS
- 18. DATABASES
- 18.1. Logging procedure
- 18.2. Access level
- 18.3. Password type
- 18.4. Type of codes
- 18.5. Access to edition of databases
- 18.6. Quick searching in databases
- 18.7. Database of operators
- 18.8. Assortment database
- 18.9. Database of weighings
- 18.10. Database of tare values
- 18.11. General purpose variables
- 18.12. Database of materials
- 18.13. Database of contractors
- 19. REPORTS FROM WEIGHINGS
- 20. CONFIGURATION OF EXTERNAL INPUTS / OUTPUTS
- 21. STATISTICS
- 22. OTHER PARAMETERS
- 23. SCALE CALIBRATION
- 24. WORK MODES
- 24.1. Setting accessibility of work modes
- 24.2. Programmable keys
- 24.3. +/- control according to an inscribed standard mass
- 24.4. Maximal force latch
- 24.5. Counting pieces
- 24.6. Deviation in percents in relation to a standard mass
- 24.7. Weighing animals
- 24.8. Dosing
- 24.9. Labelling
- 24.9.1. Triggering off „C LABEL”
- 24.9.2. Triggering off „CC LABELS”
- 24.9.3. Setting „N1” counter
- 24.9.4. Setting „M1” mass value
- 24.9.5. Setting „N2” counter
- 24.9.6. Setting „M2” mass value
- 24.9.7. Point in mass form in EAN-13 code
- 24.9.8. Setting of the number of labels to print
- 24.9.9. Setting of the number of cumulative labels to print
- 24.9.10. Setting of the number of cc labels to print
- 24.9.11. Choosing the labelling work mode
- 24.9.12. Description of labelling procedure
- 24.9.13. Printing cumulative labels
- 24.9.14. Printing cumulative labels of cumulative labels
- 25. DIAGRAMS OF CONNECTION CABLES
- 26. CONNECTORS
- 27. SPECIFICATION OF ADDITIONAL MODULES
- 28. COMMUNICATION PROTOCOL
- 28.1. General information
- 28.2. A set of commands for RS interfaces
- 28.3. Respond message format
- 28.4. Command’s description
- 28.4.1. Zeroing
- 28.4.2. Tarring
- 28.4.3. Get tare value
- 28.4.4. Set tare value
- 28.4.5. Send the stable result in basic unit
- 28.4.6. Send the result immediately in basic unit
- 28.4.7. Get immediate results from both platforms in basic units
- 28.4.8. Send the stable result in current unit
- 28.4.9. Send the result immediately in current unit
- 28.4.10. Switch on continuous transmission in basic unit
- 28.4.11. Switch off continuous transmission in basic unit
- 28.4.12. Switch on continuous transmission in current unit
- 28.4.13. Switch off continuous transmission in current unit
- 28.4.14. Lock the scale keyboard
- 28.4.15. Unlock the scale keyboard
- 28.4.16. Initiating of dosing/filling
- 28.4.17. Stop of dosing/filling
- 28.4.18. Set lower threshold
- 28.4.19. Set upper threshold
- 28.4.20. Read lower threshold
- 28.4.21. Read upper threshold
- 28.4.22. Send all implemented commands
- 28.5. Manual printouts / automatic printouts
- 28.6. Continuous transmission
- 28.7. Configuring printouts
- 29. ERROR MESSAGES
- 30. TROUBLE SHOOTING
- 31. TECHNICAL PARAMETERS
- 32. APPENDIX