RADWAG WPW 60/H5/K Multifunctional Scales - Manual (Page 64)

Notice:
This setting is valid although standard logging is disabled.
18.2.2. Access level for disabled logging
The scale program gives possibility to set an access level in case
of disabling logging procedure.
Procedure:
• Enter
<P6 DATABASES> and then:
OPERATOR - Can perform weighings, edit P1, P4, P9
parameters; cannot edit databases and erase
statistics; cannot change weighing thresholds
Min, Max, cannot adjust the standard mass
in modes “counting pieces” and “deviations”.
ADVANCED OP. - Can perform weighings and edit parameters
except P8, P10 and P6.1, P6.2, P6.3; can
edit databases except operators;
ADMIN - Have a full access to parameters and
databases, can perform user calibration
(in non-verified scales).
Return to weighing:
See 11.3.
- 64 -