Configuration of outputs – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 84
• Press
:
• Confirm your selection with
,
• Using go to the next parameter.
Caution:
You can ascribe all your buttons accordingly. Remember that the
standard solution has only 3 inputs.
Return to weighing:
See 11.3.
20.2. Configuration of outputs
Users can configure outputs according to their needs.
You can declare outputs:
MIN
Mass below the Min threshold
OK
Mass between Min and Max threshold
MAX
Mass over the Max threshold
STABLE
Stable result over the LO threshold
THRESH 1
Threshold of passing from dosing to precise
dosing in dosing mode
THRESH 2
Completing dosing process
CHUTE
Chute control
Procedure:
• To declare an output number connected with the function,
enter <P8.2 OUTPUT CONF.> and then:
• Press
, you will see <P8.2.1 MIN>,
- 84 -