Atlantis DISKMASTER NAS65020 - Manual (Page 14)

14
defaults. After the device has turned on (turn on the
power and wait 3 minutes), press and hold reset
button for 5/10 seconds, then release it to reset it
(this is used when you can not login to the
DiskMaster, e.g. forgot the password.
14 Cool FAN PWM Cooling FAN. Leave at least 10cm of space at
the rear of the device for ventilation.
There is a Reset button on the back of DiskMaster which will
help return its IP, System ID, System Password and DHCP to
their factory default values. Hold at least 5 secs to restore to
Default.
In order to obtain a full reset please click Reset button here
System->Hard
Disk Management->Hard Disk
Configuration.
1.6 Led Display
LED Color MEANING
Power Green Power ON.
LAN
Green
 OFF: LAN Disconnected
 ON/Flashing: Connected by LAN and
Accessing
USB 1
Green
 OFF: USB Device Failure or Missing
 ON/Flashing: Device Ready/ Data Accessing
USB 2
Green
 OFF: USB Device Fail or Missing
 ON/Flashing: Device Ready/ Data Accessing
HDD A
(Link)
Orange
 OFF: HDD Missing
 ON: HDD Installed
HDD A
(ACT/Stat)
Blue
 OFF: HDD Missing or Failure
 Normal Flashing: Data Accessing
 Slow Flashing: RAID 1 Rebuild
 Flashing 3/Slow, 3/Fast: RAID Error