Atlantis DISKMASTER NAS65020 - Manual (Page 16)

16
1.9 Building DiskMaster HDD System
If the hard disks are being installed for the first time, you need to initialize the
disks before you can use them. Follow the steps described below.
To configure your DiskMaster, you will need to use the web
browser, enter the IP address and then use the web
configuration for further setup. To find out the IP address (if
You changed) of your device once it is connected to the
network, there are several different ways as described on the
following pages.
Use the Setup utility included on the CD (CDRom\A06-
NASG502D\Utility\NasLink.exe). This will list the device
automatically and allow you to access the web configuration
interface with a simple click of your mouse.