Atlantis DISKMASTER NAS65020 - Manual (Page 70)

70
Access management
 Device Name: Type the name of the device. The default name is
DiskMasterG502D.
 Enable SSL Connection: Check to enable encryption. To access the
DiskMaster type https instead of http.
 Authorize Mode: If this option is not checked, the authentication is
controlled dao computer's browser. If this option is checked nanny timed idle
time (this is zero if the session is permanent) slaughtered and DiskMaster
session will require a new login
 Terminal Service Option: Enable Telnet.
 Waiting for retry: after 5 failed login DiskMaster expect the value reported
here (in minutes) before allowing another LOGIN.
 Access Control: Check the Allow All Address field to allow all IP addresses
to access the configuration of the equipment. Check the Only Allow from
listed Address field to allow access by all and only the reported IP in IP
List. Check the Address field Deny from listed to allow access from all IPs,
but block those reported in the in IP List.
After entering the parameters click Save to make permanent configuration.