Atlantis DISKMASTER NAS65020 - Manual (Page 64)

64
Settings
 Host Name: Enter the name of the FTP server.
 Listen Port: Generally, the listening port of the FTP server has the number
21. You can change that number but must be notified to the FTP client (and
appropriately changed the Virtual Server section of the ADSL Router).
 Maximum number of Logins: Enter the maximum number of
simultaneously active sessions. Each connection occupies 2 sessions (data and
control).
 Enable Passive Mode port Range: The FTP service can operate in either
active (default port 20) or passive (redirected port range shown).
 Maximum Upload/Download Rate: It 's possible to limit the introduction
of a value. A value of 0 implies no restriction DiskMaster and use all available
bandwidth.
 Upload Transfer Rate has been restricted for user: It 's possible to set
limits (upload / download) the account added. And 'possible to insert only
account (not groups). If this field is empty the restrictions will be general.
 Welcome Message: The welcome message shown to DiskMaster connection
from the FTP client connected.
After entering the parameters click Save to make permanent configuration.