Atlantis DISKMASTER NAS65020 - Manual (Page 52)

52
It should be ensured during the entire phase of upgrades, the
alimentation to the device. If this fail, the device may not be
recoverable.
Make the upgrade using a wired connection and not a wireless
one. This could damage the device and void the warranty.
Don’t use the restore files created with earlier version of the
firmware. This might make the device unstable.
During the upgrade process you should not close your web
browser,load new pages or click on links. This could damage
the firmware and make the device useless.
To upgrade/install an additional module, click on Browse and specify the path
where the module is contained.
Then click UpLoad.
Before upgrade/install controll that the version you install is
more recent than the one already installed.
The firmware upgrade (the SYS module) must be made in the
following ways:

Do the hard Reset of the disc (all data will be lost
forever)
 To restart the device, enter the Web configuration, don’t
format the HDD and click Module Upgrade and update
the SYS module.
 Restart your system, you can Login and format the disc.