AT&T CL82351 - Manual (Page 18)

Telephone settings
12
Handset settings
Set date/time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are
set automatically with each incoming call. The year must be set so that the
day of the week can be calculated from the caller ID information. You can
turn off the date and time settings of the caller ID service and set the date
and time manually (see
Use caller ID to automatically set date and time
on page 16).
After a power failure or handset registration, the system reminds you to set the
date and time.
Follow the steps below to set the month, day, year and time.
1. When the handset is in idle mode, press MENU/
SELECT
to
enter the main menu.
2. Press q
CID
or p
DIR
to scroll to >Set date/time and then
press
MENU
/SELECT.
3. Press q
CID
or p
DIR
to select the month, then press
MENU
/SELECT, or enter the number using the dialing keys.
4. Press q
CID
or p
DIR
to select the day, then press
MENU
/SELECT, or enter the number using the dialing keys.
5. Press q
CID
or p
DIR
to select the year, then press
MENU
/SELECT, or enter the number using the dialing keys,
then press
MENU
/SELECT to move on to set the time.
6. Press q
CID
or p
DIR
to select the hour, then press
MENU
/SELECT, or enter the number using the dialing keys.
7. Press q
CID
or p
DIR
to select the minute, then press
MENU
/SELECT, or enter the number using the dialing keys.
8. Press q
CID
or p
DIR
to highlight AM or PM, or press 2 for AM or 7 for PM.
Then press
MENU
/SELECT to confirm. There is a confirmation tone and the
screen returns to the previous menu.
NOTE: If the clock is not set when a message is recorded, the system announces, “Time and
day not set,” before it plays the message.
SET DATE
MM/DD/YY
p
q
SET TIME
HH:MM --
p
q
Ringers
>Set date/time
p
q