AT&T CL82351 - Manual (Page 66)

Appendix
60
MSG #
1/2
Alert tones and lights
Screen icons
Battery status - battery is charging (animated display).
Battery status - low battery (flashing); place handset in
telephone base or charger to recharge.
Speakerphone - the speakerphone is in use.
Ringer off - the handset ringer is off.
New voicemail - you have new voicemail from your
telephone service provider.
ANS ON
Answering system on - the answering system is turned on
to answer calls.
Message - new message in the built-in answering system.
NEW New caller ID log - new or missed calls.
MUTE MUTE - the handset microphone is off.
Message counter - number of message playing/total
number of messages.
Handset alert tones
1 short beep Tone of each key press, if key tone is turned on.
1 long beep Indication to begin recording a message, memo or announcement.
2 short beeps You are pressing q CID or pDIR on a cordless handset when the
volume is already at its highest or lowest setting.
-OR-
Call waiting tone.
-OR-
Error tone.
Confirmation tone
(3 rising tones) The system has completed the command successfully.
4 beeps The other party has ended your intercom call.
-OR-
The handset has gone out of range from the base during a call.
4 short beeps Low battery warning.
Telephone base tones
Beeps every 10 seconds Message alert.
Fast ringer tone You are setting the ringer volume by pressing the q /VOL/p keys
on the telephone base.
Long beep Indicates the start of message recording during call screening or
the end of a message playback session.
4 short beeps Registration failure tone.
NEW
10:21 AM
MUTE ANS ON
MSG #
1/2