AT&T CL82351 - Manual (Page 19)

Handset settings
LCD language
You can select the language used for all screen displays.
1. Press
MENU/
SELECT
in idle mode to enter the main menu.
2. Use q
CID
or p
DIR
to scroll to >Settings, then press
MENU
/SELECT.
3. Press
MENU
/SELECT to choose >LCD language.
4. Press q
CID
or p
DIR
to highlight > English, >Français
or > Español.
5. Press
MENU
/SELECT to save your preference. There is a
confirmation tone and the screen returns to the previous menu.
Caller ID announce
The caller ID announce feature lets you know who’s calling without having
to look at the display. When you have an incoming call, the handset and/or
base speaks “Call from...” and the name of the caller based on the directory
or caller ID information. If the caller’s name is private or unknown, the phone
number up to the last 11 digits will be spoken. If the caller’s phone number
is also private or unknown, no information will be spoken. By default, the
caller ID announce feature is programmed On.
To turn on/off the caller ID announce on your handset
or base:
1. Press
MENU/
SELECT
in idle mode to enter the main menu.
2. Use q
CID
or p
DIR
to scroll to >Settings, then press
MENU
/SELECT.
3. Use q
CID
or p
DIR
to scroll to >Caller ID annc, then
press
MENU
/SELECT.
4. Use q
CID
or p
DIR
to highlight >HANDSET or >BASE, then
press
MENU
/SELECT.
5. Use q
CID
or p
DIR
to highlight >On or >Off, then press
MENU
/SELECT. There is a confirmation tone and the screen
returns to the previous menu.
NOTES:
To use the caller ID announce feature, you must subscribe to caller ID service from your
telephone service provider.
When there are up to 5 handsets registered, the telephone system supports caller ID announce
for all handsets. If 6 or more handsets are registered, the system supports caller ID announce for
the first 4 registered handsets only.
This feature does not announce information for call waiting calls.
It takes at least 2 rings for the phone to receive caller ID information and announce it. If the
phone is answered before the end of the second ring, the phone won’t have time to announce
the caller’s information.
Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
Caller ID announce is available in English only.
•
•
•
•
•
•
HS CID ANNOUNCE
>On
p
q
CALLER ID ANNC
>HANDSET
p
q
LCD language
>Caller ID annc
p
q
LCD LANGUAGE
> English
> LCD language
Caller ID annc
p
q
p
q
13
Telephone settings