Lenovo ThinkServer RD340 User Manual
Page 104
Advertising
8. Remove the two screws that secure the RAID card and then remove the full-height bracket from the
RAID card.
Figure 50. Removing the full-height bracket from the RAID card
9. Note the orientation of the low-profile bracket and position it on the RAID card. Align the two screw
holes in the low-profile bracket with the corresponding screw holes in the RAID card and then install the
screws to secure the bracket.
Figure 51. Installing the low-profile bracket to the RAID card
92
ThinkServer RD340 User Guide and Hardware Maintenance Manual
Advertising