Lenovo ThinkServer RD340 User Manual
Page 46
The following illustrations show the connectors on the backplane for server models with four 3.5-inch
hard-disk-drive bays.
Figure 22. Front view of the backplane for server models with four 3.5-inch hard-disk-drive bays
1
Slot 0 for a 3.5-inch hard disk drive
3
Slot 2 for a 3.5-inch hard disk drive
2
Slot 1 for a 3.5-inch hard disk drive
4
Slot 3 for a 3.5-inch hard disk drive
Figure 23. Rear view of the backplane for server models with four 3.5-inch hard-disk-drive bays
1
8-pin power connector
3
Mini-SAS ports 0-3
2
Optical drive power connector
1
8-pin power connector
Used to connect a power cable to provide power to the backplane.
2
Optical drive power connector
Used to connect the power cable for the slim optical drive if the server has one installed.
3
Mini-SAS ports 0-3
Used to connect the mini-SAS connector on one end of a mini-SAS to mini-SAS signal cable to support the
hard disk drive 0 to hard disk drive 3.
Backplane for server models with six 2.5-inch hard-disk-drive bays
This topic provides information to help you locate the connectors on the backplane for server models
with six 2.5-inch hard-disk-drive bays.
34
ThinkServer RD340 User Guide and Hardware Maintenance Manual