Lenovo ThinkServer RD340 - Manual (Page 186)

4. Ensure that the cover latch is in the open position. Place the server cover above the chassis so that
the cover latch is aligned with the cover latch slot in the chassis. Then, lower the server cover onto
the chassis until the cover latch is inserted into its slot and both sides of the server cover engage the
guides on both sides of the chassis.
ID
CPU Mem
PSU
Figure 134. Installing the server cover
5. Pivot the cover latch to the closed position and slide the server cover to the front of the chassis at the
same time until the server cover snaps into position and the cover latch is closed.
ID
CPU Mem
PSU
Figure 135. Closing the server cover completely
6. If the server is installed in a rack cabinet, reinstall the server into the rack cabinet. See the Rack
Installation Instructions that comes with the server.
174 ThinkServer RD340 User Guide and Hardware Maintenance Manual