Lenovo ThinkServer RD340 User Manual
Page 47
The following illustrations show the connectors on the backplane for server models with six 2.5-inch
hard-disk-drive bays.
Figure 24. Front view of the backplane for server models with six 2.5-inch hard-disk-drive bays
1
Slot 0 for a 2.5-inch hard disk drive
4
Slot 5 for a 2.5-inch hard disk drive
2
Slot 2 for a 2.5-inch hard disk drive
5
Slot 3 for a 2.5-inch hard disk drive
3
Slot 4 for a 2.5-inch hard disk drive
6
Slot 1 for a 2.5-inch hard disk drive
Figure 25. Rear view of the backplane for server models with six 2.5-inch hard-disk-drive bays
1
8-pin power connector
3
Mini-SAS ports 0-3
2
Mini-SAS ports 4-5
4
Optical drive power connector
1
8-pin power connector
Used to connect a power cable to provide power to the backplane.
2
Mini-SAS ports 4-5
Used to connect the mini-SAS connector on one end of a mini-SAS to mini-SAS signal cable to support the
hard disk drive 4 to hard disk drive 5.
3
Mini-SAS ports 0-3
Used to connect the mini-SAS connector on one end of a mini-SAS to mini-SAS signal cable to support the
hard disk drive 0 to hard disk drive 3.
4
Optical drive power connector
Used to connect the power cable for the slim optical drive if the server has one installed.
Backplane for server models with eight 2.5-inch hard-disk-drive bays
This topic provides information to help you locate the connectors on the backplane for server models
with eight 2.5-inch hard-disk-drive bays.
35