Lenovo ThinkServer RD340 User Manual
Page 142
Advertising
3. Pull the handle and carefully slide the hot-swap hard disk drive or the dummy tray out of the front of
the chassis.
ID
Mem
CPU
PSU
Figure 81. Removing the hot-swap hard disk drive
Figure 82. Removing the dummy hot-swap hard-disk-drive tray
4. Touch the static-protective package that contains the new hot-swap hard disk drive to any unpainted
surface on the outside of the server. Then, take the new hot-swap hard disk drive out of the package.
Note: Do not touch the circuit board on the hard disk drive.
130
ThinkServer RD340 User Guide and Hardware Maintenance Manual
Advertising