Airlink101 AR580W3G - Manual (Page 16)

6
Right and Left Side Panel
Item Name Description
LAN/WAN Switch Switch the Ethernet port to LAN or WAN. Switch to WAN function if you
want to access to the Internet through your xDSL or Cable modem
network service. WAN access can also be a back up for 3G network.
Please refer to Section 3-4 for more details.
WPS Start WPS function or reset the router to factory default settings (clear all
settings). Press this button and hold for over 10 seconds to restore all
settings to factory defaults, or press this button for less than 5 seconds to
start WPS function.
ON/OFF Switch the button to activate or deactivate the router.
DC in Connect the supplied power adapter to this mini USB port to charge the
battery.
RJ-45 Port Local/ Wide Area Network (LAN/WAN) port.
RJ-45