Airlink101 AR580W3G - Manual (Page 45)

35
2-6 Setup Internet Connection (WAN Setup)
Internet connections setup can be done by using ‘Quick Setup’ menu described in
chapter 2-3. However, you can setup WAN connections up by using WAN configuration
menu. You can also set advanced functions like DDNS (Dynamic DNS) here.
To start configuration, please follow the following instructions:
Please click ‘WAN’ menu on the left of web management interface, and the following
message will be displayed on your web browser:
Please select an Internet connection method depend on the type of connection you’re
using. You can either click the connection method on the left (1) or right (2). If you select
the connection method on the right, please click ‘More Configuration’ button after a
method is selected.
NOTE: Default port number the web browser will use is ‘80’. If the ‘Port’
setting in this page is not ‘80’, you have to assign the port number in the
address bar of web browser manually. For example, if the IP address of this
router is 1.2.3.4, and the port number you set is 8888, you have to input
following address in the address bar of web browser:
http://1.2.3.4:8888