Airlink101 AR580W3G - Manual (Page 21)

11
3. Make sure you have switch on the router by switching the ‘ON/OFF’
button to ‘ON’.
4. Please check all LEDs on the front side. ‘PWR/CHR’ LED should be
steadily on in green color, and ‘ETHERNET’ LED should be on if the
computer / network device connected to the Ethernet port of the router is
powered on and correctly connected.
5. If PWD LED is not on, or any LED you expected is not on, please
recheck the cabling, or jump to ‘4-2 Troubleshooting’ for possible reasons
and solution.