Airlink101 AR580W3G - Manual (Page 98)

88
Comment (6): The description of this setting.
Popula Applications This section lists the more popular applications that (7):
require multiple connections. Select an application
from the Popular Applications selection and click ‘Add’ to save the
setting to ‘Current Trigger-Port Table.’
Add (8): Add the setting to the ‘Current Trigger-Port Table.’
Reset (9): Click ‘Reset’ will clear all above setting and you can set up again.
Current Trigger All the settings for the special applications will be
-Port Table (10): listed here. If you want to remove some Special Application
settings from the " Current Trigger-Port Table", select the Special
Application settings you want to remove in the table and then click
"Delete Selected". If you want remove all Special Appliacation
settings from the table, just click "Delete All" button. Click "Reset"
will clear your current selections.
Delete (11): Please select a special application by clicking the ‘Select’
box of the mapping, then click ‘Delete Selected’ button to remove
the setting. If there’s no setting here, this button will be grayed
out.
Delete All (12): Delete all settings existed in trigger port table.
Reset (13): Unselect all settings.
Note: Only one LAN client can use a particular special application at a time.
After you finish with all settings, please click ‘Apply’ (14) button and the following
message will be displayed on your web browser: