Airlink101 AR580W3G - Manual (Page 65)

55
2-7-3 Static DHCP Leases Table:
This function allows you to assign a static IP address to a specific computer forever,
so you don’t have to set the IP address for a computer, and still enjoy the benefit of
using DHCP server. Maximum 16 static IP addresses can be assigned here.
(If you set ‘Lease Time’ to ‘forever’ in ‘DHCP Server’ section, you can also assign an
IP address to a specific computer permanently, however, you will not be able to assign
a certain IP address to a specific computer, since IP addresses will be assigned in
random order by this way).
Here are descriptions of every setup items:
Enable Static Check this box to enable this function,
DHCP Leases (1): otherwise uncheck it to disable this function.
MAC Address (2): Input the MAC address of the computer or network device (total
12 characters, with character from 0 to 9, and from a to f, like
‘001122aabbcc’)
NOTE:
1. The number of the last field (mentioned ‘d’ field) of ‘End IP’ must be greater
than ‘Start IP’, and can not the same with router’s IP address.
2. The former three fields of IP address of ‘Start IP’, ‘End IP’, and ‘IP Address
of ‘LAN IP’ section (mentioned ‘a’, ‘b’, and ‘c’ field) should be the same.
3. These settings will affect wireless clients too.
1
2 3
4