Airlink101 AR580W3G - Manual (Page 34)

24
previous menu, click ‘Back’.
2-4-5 Setup procedure for ‘PPTP xDSL’:
PPTP xDSL requires two kinds of setting: WAN interface setting (setup IP address) and
PPTP setting (PPTP user name and password). Here we start from WAN interface
setting:
Select the type of how you obtain IP address from your service provider here. You can
choose ‘Obtain an IP address automatically’ (equal to DHCP, please refer to ‘Cable
Modem’ section above), or ‘Use the following IP address’ (i.e. static IP address).
MTU - Please use default value if you don’t know what it is, or ask your
service provider for a proper value.
Connection Type - There are 3 options: ‘Continuous’ - keep internet
connection alive, do not disconnect, connect on Demand - only connects to
Internet when there’s a connect attempt, and ‘Manual’ - only connects to
Internet when ‘Connect’ button on this page is pressed, and disconnects
when ‘Disconnect button is pressed.
Idle Time Out: Specify the time to shutdown internet connect after no
internet activity is detected by minute. This option is only available when
connection type is ‘Connect on Demand’.