Getting started, Plugging in and starting the phone – Aastra Telecom 6753I User Manual
Page 12
4
Model 6753i IP Phone User Guide
Getting Started
Getting Started
The 6753i must be set up and configured prior to its first use. This section describes phone
behavior and start up screens you may see when the phone is first plugged in, or when it is
restarted.
Plugging in and Starting the Phone
The 6753i automatically begins the start up sequence as soon as it is connected. The phone goes
through this process the first time you plug in your phone and every time you restart your phone.
The phone displays the following startup screens.
During the first start up the 6753i phone attempts to contact the Redirection and Configuration
Server (rcs.aastra.com) for current server information. No personal information is transmitted
from the phone during this process.
Note:
Some start up screens only appear the first time you connect your phone,
or if your phone has been factory defaulted.
Aastra 6753i
Firmware Loaded
LLDP
Initializing
network
Contacting
Redirector