Aastra Telecom 6753I - Manual (Page 67)

Model 6753i IP Phone User Guide 59
Line Keys and Programmable Keys
3. Select Speed Dial Edit.
All current speeddial key LEDs flash RED (for programmable keys and expansion module
keys). All other function key LEDs turn off, during this process. After you press a speeddial
key for editing, the phone restores all key LEDs to their previous state.
4. Press a speeddial key you want to edit.
The speeddial edit screen displays.
5. Edit the speeddial information as applicable and press SAVE.
Notes:
1. If a number on the keypad is setup as a speeddial key, pressing the applicable
number in the speeddial editing process also displays the speeddial edit screen.
The edit screen allows you to change the Speeddial Number and Line setting.
2. If you press a key that is NOT setup as a speeddial key, the phone displays an
“Invalid Key” message. However, if you press-and-hold an empty keypad key,
programmable key, or expansion module key that is set to "NONE", it initiates the
“Add a Speeddial Key” process allowing you to setup a new speeddial key. For
more information, see
“Press-and-Hold to Create a Speeddial (applicable to
programmable keys, keypad keys, expansion module keys)” on page 53 .
Notes:
1. You can cancel out of the speeddial editing process at any time without
saving, by pressing the
key.
2. You can also use the (up arrow) key to cancel when in Extension editing or the
3 (left arrow) key to cancel if in Line editing. Pressing either of these keys
displays the idle screen.
On the 6753i, you can remove the Speeddial Key by erasing the speeddial number
digits (leaving the speeddial value blank) and then press SAVE or the (right
arrow) key. Use the left arrow key to delete the digits.