Flash key, Configuring a flash key, Line keys and programmable keys – Aastra Telecom 6753I User Manual
Page 76
68
Model 6753i IP Phone User Guide
Line Keys and Programmable Keys
Flash Key
You can set a programmable key or expansion module key to generate a flash event when it is
pressed on the 6753i. You do this by setting the key to "flash". The IP phone generates flash
events only when a call is connected and there is an active RTP stream (for example, when the
call is not on hold).
Configuring a Flash Key
1. Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Programmable Keys and Expansion Module Keys
2. Select from "Key 3" through "Key 6".
or
Select from “Key 1” through “Key 36” (M670i).
3. In the "Type" field, select flash.
4. Click
to save your changes.
Aastra Web UI
Note:
Keys 1 and 2 (SAVE and DELETE keys) can be made configurable ONLY
by your System Administrator.