Aastra Telecom 6753I - Manual (Page 77)

Model 6753i IP Phone User Guide 69
Line Keys and Programmable Keys
Automatic Call Distribution (ACD) Key (for Sylantro Servers)
The 6753i and any attached Expansion Modules support Automatic Call Distribution (ACD) for
Sylantro servers. The ACD feature allows the Sylantro server to distribute calls from a queue to
registered IP phone users (agents).
To use the ACD feature on an IP phone, you must first configure an ACD key or Expansion
Module key. When you want to subscribe to a queue (in order to receive incoming calls), you press
the ACD key and the IP phone UI prompts you to specify the following information:
• User ID: the phone number(s) used to login into the queue.
• Password: the password used to login to the queue.
• Available/unavailable: Shows the current status of the IP phone. Specifies if the IP phone
user is available/unavailable to receive a call from the queue.
After creating an ACD key, you are ready to receive calls from a queue on the server. You must
press the ACD key and then log in by entering your User ID and Password. An "Available" key
displays allowing you to make your phone available to accept these calls.
When you are on an active call, or you miss a call, the server automatically changes the phone’s
status to unavailable. The server updates it’s database with this new information and no longer
distributes calls to the phone. The phone remains in this "unavailable" state until:
• you make yourself “available” again by pressing the "Available" key.
• an ACD timer expires (set by your System Administrator).
You can also choose to manually change the phone status to unavailable by pressing the
"Unavailable" key on the phone.
Note: Your System Administrator must provide you with your User ID and
Password to access the applicable phone queue.
Note: It is recommended you configure no more than a single ACD key,
programmable key, or expansion module key per IP phone.