Aastra Telecom 6753I - Manual (Page 98)

90 Model 6753i IP Phone User Guide
Line Keys and Programmable Keys
Speeddial/Conf
The 6753i allows you to configure a programmable key or expansion module key to be used as a
speeddial conference key (Speeddial/Conf key) while remaining in the current call. This key
allows a user on a call to conference another party at a pre-defined number while remaining in
the conference.
For example, while on an active call, a user can use the Speeddial/Conf key to dial a recording
service and have the resulting conference recorded.
If you configure a programmable key as a Speeddial/Conf key and you press this key while on
an active call, the focused line changes to the dialing line. A Cancel softkey displays on the
phone allowing you to abort the conference speeddial if required. The message "Ringing..."
displays below the number when the far end is ringing. The message "Conf. Unavailable" briefly
displays when a conference is already in progress. The active call is not put on hold when the
speeddial number is dialed.
Note: If not currently in a conference, the Speeddial/Conf key is disabled
on the active call.
Note: This feature is not compatible with centralized conferencing.