Media jam fuser, Output tray jams 93, Near imaging unit 93 – Konica Minolta Magicolor 3300DN User Manual
Page 101: Warning
Advertising
Clearing Media Jams
93
7
Slide the tray(s) back into the printer.
Output Tray Jams
Remove jammed media from the output tray by gently pulling it toward you. If,
after clearing the media jam, the jam message in the control panel window
persists, open and close the front cover. This should clear the jam message.
Media Jam Fuser
The
MEDIA JAM FUSER
message covers both the jams near the imaging unit
and the fuser unit.
WARNING!
The fuser unit is hot! Do not remove a jam in this area until the
fuser unit cools.
Near Imaging Unit
1
Open the front cover (button A)
, .
A
2
1
Advertising
This manual is related to the following products: