Konica Minolta Magicolor 3300DN - Manual (Page 61)

Consumable Life Expectancies 53
The numbers in CrownView (a printer-based application for accessing printer
configurations, status, and consumables usage information) and on the
consumables statistics page refer to the number of sheets/faces printed to
date during the current consumables tracking period (Administration/
Consumables/Start Period menu).
When do consumables have to be replaced?
Attention
Failure to follow instructions as outlined in this manual could void your
warranty. Use of consumables not manufactured by KONICA MINOLTA
or use of non-supported print media may cause damage to your printer
and void your warranty. If KONICA MINOLTA printer failure or damage is
found to be directly attributable to the use of non-KONICA MINOLTA
consumables, KONICA MINOLTA will not repair the printer free of
charge. In this case, standard time and material charges will be applied
to service your printer for that particular failure or damage.
Item This item needs replacing
after... Comment
Toner
cartridge <COLOR> TONER EMPTY
displays in the message
window.
See “How do I replace a toner
cartridge?” on page 58.
After you replace a toner
cartridge, its statistics are
automatically reset.
Transfer unit REPLACE TRANSFER UNIT
displays in the message
window.
See “Replacing the Transfer
Unit” on page 60.
After replacing the
transfer unit, reset the
statistics on the control
panel (Operator Control/
Consumables/Item
Replaced/Transfer Unit)
menu.
Imaging unit
(includes four
OPCs and four
developers) REPLACE IMAGING UNIT
displays in the message
window.
See “How do I replace the
imaging unit?” on page 62.
After you replace an imag-
ing unit, its statistics are
automatically reset.
Fuser unit and
media feed
roller(s) REPLACE FUSER UNIT
displays in the message
window.
See “How do I replace the
fuser unit?” on page 66.
Replace the fuser and the
media feed roller(s) at the
same time. Reset the
statistics on the control
panel (Operator Control/
Consumables/Item
Replaced/Fuser) menu.