Konica Minolta Magicolor 3300DN - Manual (Page 125)

Status, Error, and Service Messages 117
ACC <X> FILE
FULL
The job or paper
accounting file is full
(
<X> identifies the file).
This message should
be taken care of immedi-
ately because it may be
masking another prob-
lem.
If you want accounting
enabled, copy the job
accounting and paper
accounting files to floppy
disk(s), or transfer them
to your host computer
using ftp (if available).
Then reset the account-
ing files so that new jobs
can be accepted. If you
don’t want to use
accounting, you can dis-
able it.
ADC SENSOR
DUSTINESS <X>
The Automatic Density
Control (ADC) sensor is
dusty and an error or
warning has been
indicated. Clean the density sensor.
See “How do I clean the
density sensor?” on page
76.
ADJUST <INPUT>
BIN
The <INPUT> (speci-
fied tray) is not inserted
correctly.
Adjust the tray.
CALIBRATING The printer is perform-
ing an automatic clean-
ing rotation. No action needed.
CANCEL <N>
One or more of the print
jobs
<N> in the print
queue are being can-
celed.
Press Select for all
jobs with a printing, inter-
preting, spooled,
or terminating status to
be completely removed
from the system.
This message... means... do this...