Konica Minolta Magicolor 3300DN User Manual
Page 75
Advertising
Replacing the Fuser Unit
67
5
Unlock the fuser unit by sliding the two
side locks forward.
6
Lift up both levers of the fuser unit.
7
Grip the unit’s levers, and gently lift it
out of the printer.
Dispose of the used fuser
according to your local
regulations.
8
Unpack a new fuser unit, lift up both
levers , grip the fuser unit by the
levers, align it with the slots in the
printer, and slowly lower it .
9
Completely push down both levers of
the fuser unit.
10
Lock the fuser unit by sliding the two
side locks backwards.
2
1
1
Advertising
This manual is related to the following products: