Konica Minolta Magicolor 3300DN - Manual (Page 48)

Loading Media 40
All input trays—On the control panel, press the Menu key and
select Operator Control/Multipurpose Sz. Scroll to the required trans-
parency size and select it.
Do not fan transparencies. Fanning transparencies will build up static
electricity.
3
Load the media tray.
Upper and Optional Trays
Put media face side down in the
upper or optional trays.
Multipurpose Tray—Open the multipurpose tray, adjust the media
guides to the width of the transparencies, and then place the transpar-
encies into the tray with the printing side up.
Attention
Improperly adjusted guides may cause poor print quality, media
jams, or printer damage.
4
Print the transparencies.
Immediately remove the printed transparencies from the output tray.
OHP