Konica Minolta Magicolor 3300DN - Manual (Page 101)

Clearing Media Jams 93
7
Slide the tray(s) back into the printer.
Output Tray Jams
Remove jammed media from the output tray by gently pulling it toward you. If,
after clearing the media jam, the jam message in the control panel window
persists, open and close the front cover. This should clear the jam message.
Media Jam Fuser
The MEDIA JAM FUSER message covers both the jams near the imaging unit
and the fuser unit.
WARNING!
The fuser unit is hot! Do not remove a jam in this area until the
fuser unit cools.
Near Imaging Unit
1
Open the front cover (button A)
, .
A
2
1