Konica Minolta bizhub C650 - Manual (Page 113)

C650 6-10
Useful transmission functions 6
– When a frame on a specified position is not to be erased, touch the button of the desired frame and
then touch [None]. When [None] is to be cancelled, press the keypad or [+] button and specify the
erase quantity.
– For European models (Metric)
For setting the Frame Erase values in European models (Metric), press the keypad or [-], [+]. "Input
Error" is displayed when a numerical value outside the range is input. When "Input Error" is
displayed or when there is any mistake while entering the deletion width, press [C] (clear) key and
enter the value again.
– For North America models (Inch)
For setting the Frame erase values in North American models (Inch) with fraction display, touch
[
], change the numerator and denominator and the touch [-], [+].
To set the frame erase values for numeric display in North American models (Inch), press keypad or
[-] and [+]. "Input Error" is displayed when a numerical value outside the range is input. When "Input
Error" is displayed or when there is any mistake while entering the deletion width, press [C] (clear)
key and enter the value again.
For details on switching between decimal and fraction values, refer to "User’s Guide [Copy
Operations]".
– Touch [No] to cancel the frame erase settings.
6
Touch [OK].
Returns to Erase screen.
7
Touch [Close].
Returns to Scan Settings screen.
8
Touch [OK].
Returns to Fax/Scan screen.
9
Set other functions if required.
– For details on Scan Settings, refer to "Specifying the scan conditions" on page 2-14 or "Scan
Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on page 6-3.