Konica Minolta bizhub C650 User Manual
Page 43
C650
2-11
Transmission
2
4
Load the original on the ADF or original glass and touch
buttons in order of [Scan Settings], [Separate Scan], [OK]
and press [Start] key.
–
ADF is given priority among original glass and ADF.
–
For details of original loading on ADF, refer to
"Loading the original into the ADF" on page 2-9 and
for details of original loading on the original glass,
refer to "Loading the original on the original glass" on
page 2-9.
5
Load the original sequentially on the ADF or original glass and press [Start] key.
–
If [Change Setting] is touched, Simple/Duplex setting and Frame Erase setting, etc. can be changed.
–
This operation is repeated until all the original to be sent is scanned.
The scanned original is stored in the memory.
6
Touch [Finish].
7
Press [Start] key.
The transmission begins.