Konica Minolta bizhub C650 - Manual (Page 117)

C650 6-14
Useful transmission functions 6
– Center Erase Screen
For European models (Metric)
For setting the Center Erase values in European models (Metric), press keypad or [-], [+]. "Input
Error" is displayed when a numerical value outside the range is input. When "Input Error" is
displayed or when there is any mistake while entering the deletion width, press [C] (clear) key and
enter the value again.
For North America models (Inch)
For setting the Fold erase values in North American models (Inch) with fraction display, touch [
],
change the numerator and denominator and then touch [-], [+].
For setting the Center Erase values in the numeric display in North American models (Inch), press
keypad or [-] and [+]. "Input Error" is displayed when a numerical value outside the range is input.
When "Input Error" is displayed or when there is any mistake while entering the deletion width, press
[C] (clear) key and enter the value again.
For details on switching between decimal and fraction values, refer to "User’s Guide [Copy
Operations]".
– For details on [Frame Erase], refer to "Sending the fax after erasing shadows (Frame Erase)" on
page 6-9.
6
Touch [OK].
Returns to Book Scan screen.
7
Touch [Close].
Returns to Scan Settings screen.
8
Touch [OK].
Returns to Fax/Scan screen
9
Set other functions if required.
– For details on Scan Settings, refer to "Specifying the scan conditions" on page 2-14 or "Scan
Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on page 6-3.
– For details on communication settings, refer to "Communication Settings" on page 6-4.