Konica Minolta bizhub C650 - Manual (Page 290)

C650 11-7
Appendix 11
Incoming Status where the fax machine answers the call.
Long Original A function for sending original pages longer than A3 size (420mm/16-1/2 inch). Long orig-
inals can be transmitted after specifying the setting for long originals.
Main scanning direction Horizontal direction for scanning originals.
Manual transmission Operation to send a fax while checking the conditions of the receiving machine.
Memory A location where data is temporarily stored. The memory is used when communication is
specified or temporarily stored in the original.
Memory overflow Condition where the fax memory becomes full when scanned originals or temporarily
stored originals are stored.
Memory transmission Procedure for starting a fax transmission after an original is scanned and stored in the
memory. If the memory transmission is used, the total number of pages are automatically
printed in the page number of the transmission source information and an image of the first
page of the sent original is included in the transmission report. However, the memory may
become full if there are many pages in the original or if the data is large due to fine image
quality.
Mixed Original This is a function to detect and send the respective size of original by setting the original
with different sizes.
Total # of Pages Used for quick memory transmission to send the fax with the number of pages indicated.
This allows the recipient to check whether the all pages were received or not (In case of
memory transmission, the total no. of pages are automatically added).
Overseas communica-
tion A function to communicate with an overseas recipient. If an overseas communication
mode is set, the fax is sent at a lower speed. Specifying an overseas transmission mode
when faxing to the location where transmission conditions are poor, even within the coun-
try, ensures that the fax can be sent.
Password transmission A function for sending a fax with a password. If the recipient’s fax machine is set for closed
network receptions, the sender must send the same password as the recipient’s closed
network reception password.
Pause A temporary break in dialing. In this machine, each pause creates a one second break dur-
ing dialing.
PB Push telephone line
Polling A function for sending an original loaded on the machine or stored in the memory when
requested by the recipient.
Program destination A function for registering fax numbers of destination that is sent and received frequently
and operation procedures of preset transmission. After simply touching the program but-
ton, the destination is specified and the communication can be automatically performed
with the specified functions.
Quick memory transmis-
sion A method to start sending of fax by scanning one page of the original at the same time.
Function to send the original without overflowing the memory even in case of multiple orig-
inals.
Redial A function for dialing a fax number again after waiting for a specified length of time, for ex-
ample, if the recipient’s line was busy.
There are 2 dialing methods like the manual dialing for manually redialing the number and
the auto dialing for automatically redialing the number.
Rejection of incoming
calls A function to avoid the reception of the troublesome fax after registering in advance the
received telephone number of the recipient which is to be denied. When the registered tel-
ephone number matches with the receiving telephone number, the [Receiving Rejection]
message is displayed and fax is not received.
Relay broadcast A function to transmit the broadcasting via other fax (Called as a relay distribution station).
When there are multiple broadcast destinations at distant places, one of the broadcast
destination is specified to the relay station and the entire amount of the communication
charges can be reduced after relay transmitting from the relaying station.
Relay distribution station A feature to broadcast the fax to the relay distribution station after receiving the relay re-
quest from the relay instruction station. The relay distribution function is not set in this
function.
Relay instruction station A fax machine that sends the relay broadcast request.
Remote reception A function for specifying that a fax be received using a remote number from an external
telephone.
Resending This is a function to resend the specific original stored in the memory that couldn’t be sent
either to same destination or to another destination.
Resolution Degree of details when scanning an original. The higher the resolution, more detailed is the
image and as such more time is required for transmission (transmission time). Select the
appropriate resolution.
Terms Description