Konica Minolta bizhub C650 - Manual (Page 119)

C650 6-16
Useful transmission functions 6
6.6 Sending a fax with the specified original scanning area (Scan Size)
Scan Size
Scan Size is a function for specifying the scanning size of an original.
When the paper width on the recipient’s side is smaller than the paper size of the original that is sent, the
original is reduced and then printed. When the original is not to be reduced, and the scan size is specified for
the paper size on the recipient’s side, the original of the original size can be sent.
2
Note
The original scanning position of an original loaded on ADF is different from the original scanning
position of an original loaded on original glass.
When Scan Size and mixed Original Setting are specified at the same time, the size specified in Scan
Size is applied.
Sending the fax by specifying the scan size
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
– For details on loading originals, refer to "Loading the original" on page 2-9.
3
Touch buttons in order of [Scan Settings], [Application].
4
Touch [Scan Size].
JAPAN CHINA
AUSTRALIA
Indian Ocean
PAPUA
NEW GUINEA
INDONESIA
PHILIPPINES
MONGOLIA
THAILAND
VIETNAM
MALAYSIA
SINGAPORE
BRUNEI
Taiwan
NORTH KOREA
SOUTH KOREA
CAMBODIA
LAOS NMAR
BHUTAN
LADESH
RUSSIA
JAPAN CHINA
PHILIPPINES
GOLIA
LAND
VIETNAM
ALAYSIA
INGAPORE
BRUNEI
Taiwan
NORTH KOREA
SOUTH KOREA
AMBODIA
OS
RUSSIA