Konica Minolta bizhub C650 - Manual (Page 46)

C650 2-14
Transmission 2
2.5 Specifying the scan conditions
If [Scan Settings] is touched, [Original Type], [Simplex/Duplex], [Resolution], [File Type], [Density] are
displayed and transmission conditions as per the original to be sent can be specified.
!
Detail
When sending a color transmission, set "Destination Machine Type" to "Color". For details on the
"Color" setting, refer to "Specifying by direct input" on page 2-21 and "Registering IP Addresses in
Address Book" on page 8-5.
Specifying Scan Settings
1
Touch [Scan Settings] of the Fax/Scan screen.
2
Select the function to be specified.
2
Note
Transmission condition cannot be specified for each page.
Original Type
Set the Original Type as per the original contents.
There are following 5 types of Original Type.
At the time of purchase, original type is set for [Text/Photo].
- [Text]:
Touch only when the text original is to be scanned. The photo original becomes dark if it is scanned by
selecting this mode without repeating the neutral color of the photo.