Konica Minolta bizhub 25e - Manual (Page 15)

1-8 Logging in / Logging out
Login as administrator using SSL
Message Board supports SSL (Secure Socket Layer) security for data communication.
SSL communication encrypts the data communicated between the computers and
Message Board to prevent the theft and modification of data by outside parties.
When you perform an SSL login, the [SSL] icon is displayed on the header of Message
Board screen.
1
Connect to Message Board (page 1-4) .
2
Click [Admin Login].
If an administrator password is not set, this concludes the procedure.
3
Click [SSL (https)].
4
Enter the administrator password, and click [Login].
NOTE
• If you use SSL, the response time will be slower than a regular login because
encryption and authentication are performed for the data.
• When the administrator password is not set, enter Message Board by entering the
IP address of the machine beginning with “https://”and click [Enter].
„ Log in to Message Board when no user is registered
When no user is registered, you can log in as a guest by the following procedures:
1
Connect to Message Board (page 1-4) .
2
Click [User Login].