Konica Minolta bizhub 25e - Manual (Page 68)

1
2
3
Machine settings
Setting the e-mail environment 3-11
Setting Description Settings
E-mail address
or domain name
that will accept
forwarded
transmissions If you select “Send to author.”, you can specify to forward
faxes only for forwarding requests received from the
specified e-mail addresses or domain names. You can
register up to five e-mail addresses or domain names to
allow forwarding requests for.
If nothing is registered in the list, an MDN is sent for all
e-mail addresses or domain names.
<To add an e-mail address or domain name>
Enter the e-mail address or domain name in the entry
box, and click [Add].
<To delete an IP address or domain name>
Select the e-mail address or domain name to delete, then
click [Delete]. To select all the registered e-mail address
and domain name, check [Select All].
50 characters
(0 - 9, A - z, @,
., -, _)
*1 If e-mail is broadcasted in large volumes to multiple addresses, some servers may not accept
the e-mail. If this happens, select “Don’t show any recipients.”.
With this selected, the destination information is not written in the e-mail.
*2 If you select “Always send a MDN.”, but do not add specific e-mail addresses or domains to
allow the response for, an MDN is sent for all e-mail addresses.
*3 If you select “Accept the forwarding request.”, but do not add specific e-mail addresses or
domains to allow forwarding requests for, fax forwarding is performed for all e-mail addresses.
5
Click [Save].
• Click [Back] not to save the setting and return to the “E-mail Settings” list screen.
• Click [Initialize] to restore the default settings.
NOTE
Underlined values are the default settings specified at the time of shipment.