Konica Minolta bizhub 25e - Manual (Page 31)

2-12 Registering addresses
6
Set the destination.
Setting Description Settings
Search Searches an LDAP server to register destinations in
the address book.
Refer to
“Registering destination using an LDAP
server” on page 2-14 .
Number The smallest free number is automatically entered.
You can change it to a number of your choice.
This item is required.
You cannot enter an existing number. However, the
same number can be registered in both the shared
address book and the personal address book. 1 - 9999
Name Enter the name of the destination.
This item is required.
You cannot enter an existing name. However, the same
name can be registered in both the shared address
book and the personal address book. 30 characters
Fax Number *1 Enter the fax number of the destination.
The following dialing options are also available:
Option Description
- Hyphen.
Makes the entered fax number easier to see.
(Example) 111-1111-1111
/P Pause.
This is used to open a space between dials.
To increase the pause time, enter multiple
pause options.
(Example) 2/P222-2222-2222
/T Tone.
This is used to switch from pulse-dialing
to tone-dialing. This option may not be
available in some countries and regions.
/N Prefix.
This is used to enter a prefix number. To
use a prefix number, register it in advance.
For details, see
“Specifying default machine
settings” (page 3-24).
(Example) /N333-3333-3333
40 digits
E-mail Address *1 Enter the e-mail address for the destination. 50 characters
PIN Enter the PIN. 8 digits, *, #
Super G3 Set whether to transmit with Super G3. ON
OFF
*1 Either fax number or e-mail address must be entered.