AOC P/N : 41A50-144 User Manual
Page 8
7
4. ADJUSTMENT
4-1 ADJUSTMENT CONDITIONS AND PRECAUTIONS
Adjustments should be undertaken only on following function : contrast, brightness focus, clock, h-position,
v-position, red, green, blue since 6500 color & 7800 color.
4-2 ADJUSTMENT
METHOD
Press MENU button to activate OSD Menu or make a confirmation on desired function, Press Left/Right button
to select the function or done the adjustment.
1.
White-Balance, Luminance adjustment
Approximately 30 minutes should be allowed for warm up before proceeding white balance
adjustment.
Before started adjust white balance ,please setting the Chroma-7120 MEM. Channel 5 to 7800 color and
MEM. channel 6 to 6500 color, ( our 7800 parameter is x = 296 10, y = 311 10, Y = 160 5cd/m2
and 6500 parameter is x = 313 10, y = 329 10, Y = 160 5 cd/m
2
)
How to setting MEM.channel you can reference to chroma 7120 user guide or simple use “ SC” key and
“ NEXT” key to modify xyY value and use “ID” key to modify the TEXT description
Following is the procedure to do white-balance adjust
Press MENU button during 2 seconds along with plug in the DC-power cord will activate the factory
mode, and the OSD screen will located at
left top of panel
.
I. Bias (Low luminance) adjustment :
1.
Press “ AUTO” button , and wait for message “ Pass” ,check the Blacklevel value on
OSD should be large than 30, if less than 30 that means the offset calculation FAIL,
please manual adjust the blacklevel to value 43
2.
set the contrast and brightness on OSD window to maximal value , RGB to “50”
3.
adjust the VR501 on INTERFACE board until chroma 7120 measurement reach the
value Y=240 cd/m
2
cd/m
2
II. Gain adjustment :
a. adjust 7800 color-temperature
4.
Set the Contrast of OSD function to 40, Brightness to 48
5.
Switch the chroma-7120 to RGB-mode (with press “MODE” button )
6.
switch the MEM.channel to Channel 05 ( with up or down arrow on chroma 7120 )
7.
The lcd-indicator on chroma 7120 will show x = 296
, y = 311
, Y = 160
cd/m
2
8.
Adjust the RED on OSD window until chroma 7120 indicator reached the value
R=100